资源列表
[嵌入式Linux] s3c44b0-mcp2510
说明:S3C2410处理器上的Linux 2.4内核CAN总线驱动程序-S3C2410 processor on the Linux kernel 2.4 CAN Bus Driver<jia> 在 2025-06-25 上传 | 大小:7kb | 下载:0
[嵌入式Linux] 4.1_memory_test
说明:memory_test Memory Read/Write Access Test Memory read base Address : 0xc010000 Memory write base Address : 0xc02-memory_test Memory Read/Write Access Tes t read base Memory Address : Memory write 0xc010000 base Address : 0xc02<zhang> 在 2025-06-25 上传 | 大小:7kb | 下载:0
[嵌入式Linux] drivers
说明:在S3C44B0上实现的键盘和LED驱动程序,其关键是使用了系统定时器来提高效率。此代码依赖于硬件的GPIO接口,但只需按照实际稍微改动即可。-S3C44B0 in achieving the keyboard and LED driver, The key is to use a timer system to improve efficiency. This code depends on the hardware GPIO interface, but only in accordance<陈器> 在 2025-06-25 上传 | 大小:7kb | 下载:0
[嵌入式Linux] iic_X1227_test
说明:Linux下调用2410内的IIC模块完成与X1227时钟芯片的通讯-Call 2410 under Linux within the IIC module complete with the X1227 clock chip communication<chen> 在 2025-06-25 上传 | 大小:7kb | 下载:0
[嵌入式Linux] can_driver
说明:2410linux下的CAN驱动-2410linux under the CAN driver<elechi> 在 2025-06-25 上传 | 大小:7kb | 下载:0
[嵌入式Linux] s1d13xxxfb
说明:s1d13506在linux下的驱动.在at91上用过了,没问题.-s1d13506 in the drive under linux. in AT91 on a used, no problem.<slf> 在 2025-06-25 上传 | 大小:7kb | 下载:0
[嵌入式Linux] 5.4-thread
说明:s3c2410实验箱关于arm linux多线程编程的实例。代码非常详细有注释。-S3C2410 experimental arm linux box on the examples of multi-threaded programming. Very detailed annotated code.<jackylijiesi> 在 2025-06-25 上传 | 大小:7kb | 下载:0
[嵌入式Linux] open_eth_drv
说明:opencores的以太网(百兆)在linux下面的驱动程序。-opencores Ethernet (Fast) in the following linux drivers.<minona2> 在 2025-06-25 上传 | 大小:7kb | 下载:0