资源列表

« 1 2 ... .41 .42 .43 .44 .45 2146.47 .48 .49 .50 .51 ... 4310 »

[VHDL编程SPWM

说明:单片机模拟输出spwm波,可实现低频正弦波的发生-Microcontroller analog output spwm wave, the occurrence of low frequency sine wave
<weiwei> 在 2025-06-09 上传 | 大小:4kb | 下载:0

[VHDL编程Decoder

说明:非常经典的VHDL的编码程序等,里面包含了详细的程序和应用文档非常有使用价值-Very classic VHDL coding procedures, which includes detailed procedures and application document is a use value
<luogui> 在 2025-06-09 上传 | 大小:243kb | 下载:0

[VHDL编程FPGAs

说明:FPGA开发实例,是采用实际的例子讲解FPGA的开发技术,使读者很快对fpga开发有个感性认识,比其他fpga开发的书更容易理解和掌握-FPGA Development instance, is the use of practical examples to explain the development of FPGA technology, the reader will soon have a perceptual development of fpga, fpga developmen
<jiany> 在 2025-06-09 上传 | 大小:43.71mb | 下载:0

[VHDL编程IIC_VHDL

说明:I2C总线的FPGA描述,基于FPGA平台的两线制串行通信协议的硬件模拟,采用VHDL语言描述。-Inter Integrated Circuit in VHDL
<孙佳宇> 在 2025-06-09 上传 | 大小:1.56mb | 下载:0

[VHDL编程Cordic_Verilog

说明:基于FPGA平台的,坐标旋转数字计算方法Cordic的Verilog描述。可用于计算sin、cos等三角函数。-Cordic in verilog hdl
<孙佳宇> 在 2025-06-09 上传 | 大小:3kb | 下载:0

[VHDL编程simulation_Text_Access

说明:基于VHDL的仿真simulation激励,读取Text IO文件中的bin类型文件中的二进制数,作为仿真激励。-VHDL Read bin type file。
<孙佳宇> 在 2025-06-09 上传 | 大小:42kb | 下载:0

[VHDL编程AD-1270

说明:12位的AD,将读取的数字量放在LCD1602上显示,经过实验,可以用,开发者可以直接借鉴! 希望资料对大家有帮助!-12 of the AD, will read the digital display on the LCD1602, through experiments, can be used, developers can learn from! Want information to help everyone!
<梁帅> 在 2025-06-09 上传 | 大小:18kb | 下载:0

[VHDL编程mma7455-IIC-chengxu-C52

说明:mma7455IIC测试程序C52 外加1602显示和串口数据发送-mma7455IIC test program to display and C52 plus 1602 serial data transmission
<wang> 在 2025-06-09 上传 | 大小:47kb | 下载:0

[VHDL编程I2C

说明:I2C接口协议,通过51单片机IO口实现,C语言-I2C interface,
<Recky> 在 2025-06-09 上传 | 大小:2kb | 下载:0

[VHDL编程1602Dynamic-display

说明:名称:LCD1602 内容:通过标准程序动态显示字符 引脚定义如下:1-VSS 2-VDD 3-V0 4-RS 5-R/W 6-E 7-14 DB0-DB7 15-BLA 16-BLK-Name: LCD1602 content: The standard procedure for dynamic display of character pins are defined as follows :1-VSS 2-VDD 3-V0 4-RS 5-R/W 6-E 7-14 DB0
<陈超> 在 2025-06-09 上传 | 大小:15kb | 下载:0

[VHDL编程miaobiao

说明:用动态扫描方法和定时器1在数码管的前三位显示出秒表, 精确到1 秒,即最后一位显示1 秒,一直循环下去 设时钟频率为12M-With dynamic scanning method and Timer 1 in the top three shows digital stopwatch, accurate to 1 of the second and final one shows 1 seconds, the clock has been set down cycle freque
<欧阳杨> 在 2025-06-09 上传 | 大小:13kb | 下载:0

[VHDL编程liushuideng-saomiao

说明:利用动态扫描和定时器1在数码管上显示 出从765432开始以1/10秒的速度往下递减 直至765398并保持显示此数,与此同时利 用定时器0以500MS速度进行流水灯从上至 下移动,当数码管上数减到停止时,实验 板上流水灯也停止然后全部开始闪烁,3秒 后(用T0定时)流水灯全部关闭、数码管上 显示出"HELLO"。到此保持住。 设晶振频率为12MHz。-The use of dynamic scanning and Timer 1 in the digital d
<欧阳杨> 在 2025-06-09 上传 | 大小:19kb | 下载:0
« 1 2 ... .41 .42 .43 .44 .45 2146.47 .48 .49 .50 .51 ... 4310 »

源码中国 www.ymcn.org