资源列表
[VHDL编程] i2c_init.tar
说明:verilog i2c initialization module<ascensor > 在 2025-06-08 上传 | 大小:3kb | 下载:0
[VHDL编程] i2c_wishbone.tar
说明:verilog i2c master wishbone slave wrapper<ascensor > 在 2025-06-08 上传 | 大小:4kb | 下载:0
[VHDL编程] spi_slave_test
说明:实现spi协议的从机代码,亲测可用。按照字节接收,发送可以实现一次发送19字节,可按照需要更改。(The implementation of the code of the SPI slave protocol is available. By byte received, sending can be sent to send 19 bytes at a time, which can be changed as needed.)<fantastic_guy > 在 2025-06-08 上传 | 大小:985kb | 下载:0
[VHDL编程] clock
说明:自己开发的电子时钟小程序,通过数码管显示时间,key1和key2控制校时校分,key3切换时钟模式和闹钟模式,切换到闹钟模式再按key1和key2即可设定闹钟时间。key4控制开启/关闭闹钟。有整点报时功能。(Self developed electronic clock applet, through the digital tube display time, key1 and key2 control time correction, Key3 switch clock mode and<军犬 > 在 2025-06-08 上传 | 大小:8.91mb | 下载:0
[VHDL编程] UART
说明:自己写的uart实验程序,可通过按键选择波特率2400/4800/9600/19200,并通过数码管显示当前波特率。每按一次按键发送一帧数据,并通过两位数码管显示发送数据。可供新手学习。(The UART experiment program you write can select the baud rate 2400/4800/9600/19200 by key and display the current baud rate through the digital tube. Each<军犬 > 在 2025-06-08 上传 | 大小:6.45mb | 下载:0