资源列表

« 1 2 ... .36 .37 .38 .39 .40 1841.42 .43 .44 .45 .46 ... 4310 »

[VHDL编程percent

说明:verilog编写的计算百分比模块-Verilog prepared by calculating the percentage module
<刘陆陆> 在 2025-06-11 上传 | 大小:91kb | 下载:0

[VHDL编程rtl

说明:用verilog编写的网卡芯片rtl级。前仿后仿都通过了,可以在modelsim上运行察看-verilogrtl After the former imitation through imitation, it can run on the look modelsim
<刘吉> 在 2025-06-11 上传 | 大小:91kb | 下载:0

[VHDL编程PCI-BUS-With-FPGA-Design

说明:PCI总线协议的FPGA 实现及驱动设计-FPGA implementation of the PCI bus protocol-driven design ...
<minsun> 在 2025-06-11 上传 | 大小:90kb | 下载:0

[VHDL编程21877012MCU_NandFlash

说明:NAND FLASH控制器源代码-NAND FLASH controller source code (...........
<hongxiao> 在 2025-06-11 上传 | 大小:90kb | 下载:0

[VHDL编程DIVISION

说明:用verilog HDL语言编写的实现两个数相除的例程,在DE-70开发板上实现。-Verilog HDL language routines divide two numbers in the DE-70 development board to achieve.
<李桐> 在 2025-06-11 上传 | 大小:90kb | 下载:0

[VHDL编程DECL7S

说明:七段数码管显示的VHDL程序,教课书上给的例子,初学VHDL时候使用的。-Seven-segment LED display VHDL program, the textbooks give examples of when to use VHDL beginners.
<泠血> 在 2025-06-11 上传 | 大小:90kb | 下载:0

[VHDL编程MPSK-modulation-VHDL-

说明:MPSK调制与解调VHDL程序与仿真,本文为DOC文档,附有源码和仿真波形-MPSK modulation and demodulation VHDL program and simulation, this paper for the DOC document, attached to the source code and simulation waveform
<> 在 2025-06-11 上传 | 大小:90kb | 下载:0

[VHDL编程ddr2_controller

说明:A controller for DDR2 on FPGA with vhdl, content testbench, model and textfile-generation/data-detection using python.
<inru> 在 2025-06-11 上传 | 大小:90kb | 下载:0

[VHDL编程cpu3

说明:简易CPU可执行8条简单指令,如:add,xor,and等-risc cpu
<youyangbiao> 在 2025-06-11 上传 | 大小:90kb | 下载:0

[VHDL编程The-basic-design-of-the-flip-flop

说明:1、了解基本触发器的工作原理。 2、进一步熟悉在Quartus II中基于原理图设计的流程。 - The basic design of the flip-flop
<漆广文> 在 2025-06-11 上传 | 大小:90kb | 下载:0

[VHDL编程arm4u_latest.tar

说明:DESIGN OF A DYNAMICALLY RECONFIGURABLE PIPELINED RISC PROCESSOR
<rakesh tiwari> 在 2025-06-11 上传 | 大小:90kb | 下载:0

[VHDL编程FIFO Design Using Verlilog

说明:DFF with fifo concepts
<logu.am > 在 2025-06-11 上传 | 大小:90kb | 下载:0
« 1 2 ... .36 .37 .38 .39 .40 1841.42 .43 .44 .45 .46 ... 4310 »

源码中国 www.ymcn.org