资源列表
[VHDL编程] VHDLprogram
说明:含有各类寄存器,AD和DA转换器,各种算法,有限状态机,还些许组合逻辑电路设计代码-Containing various types of registers, AD and DA converters, a variety of algorithms, finite state machine, but also some combinational logic circuit design code<zhouwenbin> 在 2025-06-07 上传 | 大小:1.72mb | 下载:0
[VHDL编程] ram_latest
说明:VHDL实现CISC模型微处理器设计(含有rom和ram)本程序实现的是输入10个数,输出最小负数-VHDL model to achieve CISC microprocessor design (with rom and ram) to achieve this procedure is the number of input 10 and output the smallest negative<叶才三> 在 2025-06-07 上传 | 大小:1.72mb | 下载:0
[VHDL编程] traffic-light
说明:使用VHDL编写的交通灯控制代码,可以用于课程设计或者毕业设计使用,已经经过调试运行正确-Using the VHDL code written in traffic light control, can be used for graduate design course design or use, has been commissioning the right<王战雷> 在 2025-06-07 上传 | 大小:1.72mb | 下载:0
[VHDL编程] jiaotongdeng
说明:交通信号灯自动控制器,能下载到FPGA开发板,自动交通灯控制程序,由VHDL编写,环境为QUTUS2-Traffic signal controller, can be downloaded to the FPGA development board, automatic traffic light control procedures, written by VHDL environment QUTUS2<dengnana> 在 2025-06-07 上传 | 大小:1.72mb | 下载:0
[VHDL编程] AD0804
说明:FPGA之ADC0804实验(1)程序是用ADC0804显示00-ff(2)将其转换成0-255;(3)将其转换成0-5.0V; (4)如果输入电压大于2.5V,设定报警灯亮。此程序基于Quartus的编程环境,采用Veilog语言编写。-ADC0804 FPGA experiment (1) program is to use ADC0804 00-FF (2) will be converted into 0-255 (3) will be converted into 0-5.0V (<丁明凯> 在 2025-06-07 上传 | 大小:1.73mb | 下载:0
[VHDL编程] UART-Altera
说明:使用Atera FPGA CycloneII 实现串口通信,遵循RS232协议。FPGA上的模块实现了数据的接收,取补码和发送。(Achieve serial communication with FPGA, following the protocol of RS232.)<swy0721 > 在 2025-06-07 上传 | 大小:1.73mb | 下载:0