资源列表
[matlab例程] code-matlab
说明:利用SIMULINK和M函数相结合的方式仿真BFSK 调制在多路径瑞丽衰落信道中的传输性能。其中 source产生速率为10Kbit/s、帧长度为1秒的二进制数据源data,并且通过BFSK产生调制信号。BFSK调制的频率间隔为24KHz, BPSK调制符号的样点数为2,调制信号通过多径瑞利衰落信道,移动终端相对运动速率为40公里/小时,接收端对信号进行解调,并把解调后的信号和原始数据信号相比较计算误比特率。最后Sink模块根据SNR与误比特率的关系绘制曲线。-And M functions u<陈思远> 在 2025-11-06 上传 | 大小:15kb | 下载:0
[matlab例程] PCM
说明:运用MATLAB语言,进行非均匀PCM量化编码。产生一个长度为500,按N(0,1)分布的随机变量序列。用64量化电平和μ=255的μ律非线性,画出量化器的误差和输入输出关系。-Using MATLAB language, non-uniform quantization PCM coding. Produces a length of 500, according to the sequence of random variables N (0,1) distribution. With 64<陈思远> 在 2025-11-06 上传 | 大小:2kb | 下载:0
[matlab例程] trajectory3d2targets
说明:matlab实现在三维空间中两个目标的航迹模拟并画出轨迹。先匀速直线运动,而后转弯,再进行匀速直线运动-matlab simulation and draw the trajectory track to achieve two goals in three-dimensional space. First uniform linear motion, then turn, then the uniform linear motion<HaoQiu> 在 2025-11-06 上传 | 大小:1kb | 下载:0
[matlab例程] EKF2targets
说明:利用EKF,对两个做CV运动的目标进行跟踪,效果个人认为可以接受,但Z方向误差较大-Use EKF, the movement of the two do CV target tracking, the effect of the individual is considered acceptable, but large error in Z direction<HaoQiu> 在 2025-11-06 上传 | 大小:2kb | 下载:0
[matlab例程] fuzzy_cluster_knn
说明:基于模糊聚类KNN的室内WLAN算法研究 源代码 使用matlab实现-indoor WLAN location based on fuzzy cluster KNN algorithm<郭伟奇> 在 2025-11-06 上传 | 大小:2kb | 下载:0
[matlab例程] LS1
说明:系统辨识作业,M序列作为输入信号,分别利用递推最小二乘法,递推辅助变量法,广义最小二乘法进行估计-System identification operations, M sequence as input signals, respectively, the use of recursive least squares method, the recursive instrumental variable method, generalized least squares estimation<HaoQiu> 在 2025-11-06 上传 | 大小:2kb | 下载:0
[matlab例程] maichongxiangyingfa
说明:系统辨识作业,输入信号为M序列,利用互相关函数及脉冲响应法求出系统的传递函数。-Identification of the operating system, the input signal for the M series, the transfer function of the system is obtained using cross-correlation function and impulse response method.<HaoQiu> 在 2025-11-06 上传 | 大小:1kb | 下载:0