文件名称:PWM_DblEdg
- 所属分类：
- 微处理器(ARM/PowerPC等)
- 资源属性：
- [C/C++] [源码]
- 上传时间：
- 2012-11-26
- 文件大小：
- 313kb
- 下载次数：
- 0次
- 提 供 者：
- 相关连接：
- 无
- 下载说明：
- 别用迅雷下载，失败请重下，重下不扣分！
介绍说明－－下载内容均来自于网络，请自行研究使用
MCPWM 含有 3 个独立的通道，每个通道包括：
1 个32 位定时器/计数器（TC）；
1 个32 位界限寄存器（LIM）；
1 个32 匹配寄存器（MAT）；
1 个10 位死区时间寄存器（DT）和相应的 10 位死区时间计数器；
1 个32 位捕获寄存器；
2 个极性相反的已调整的输出（MCOA 和 MCOB）；
1 个周期中断、1 个脉宽中断和 1 个捕获中断。 -MCPWM contains three separate channels, each channel includes: 1 32 bit timer/counter (TC) 1 32-bit limit register (LIM) 1 32-match register (MAT) 1个10 dead time register (DT) and the corresponding 10-bit dead time counter 1 32-bit capture register 2个opposite polarity adjusted output (MCOA and MCOB) 1 cycle interrupt a pulse-width capture interrupts and an interrupt.
1 个32 位定时器/计数器（TC）；
1 个32 位界限寄存器（LIM）；
1 个32 匹配寄存器（MAT）；
1 个10 位死区时间寄存器（DT）和相应的 10 位死区时间计数器；
1 个32 位捕获寄存器；
2 个极性相反的已调整的输出（MCOA 和 MCOB）；
1 个周期中断、1 个脉宽中断和 1 个捕获中断。 -MCPWM contains three separate channels, each channel includes: 1 32 bit timer/counter (TC) 1 32-bit limit register (LIM) 1 32-match register (MAT) 1个10 dead time register (DT) and the corresponding 10-bit dead time counter 1 32-bit capture register 2个opposite polarity adjusted output (MCOA and MCOB) 1 cycle interrupt a pulse-width capture interrupts and an interrupt.
(系统自动生成,下载前可以参看下载内容)
下载文件列表
PWM_DblEdg\PWM_DblEdg.bmp
..........\Thumbs.db
..........\Cortex-M3 Execute for lpc1700\config.h
..........\.............................\Cortex-M3 Execute for lpc1700.map
..........\.............................\Cortex-M3 Execute for lpc1700.Opt
..........\.............................\Cortex-M3 Execute for lpc1700.Uv2
..........\.............................\Cortex-M3 Execute for lpc1700_DebugInFlash.dep
..........\.............................\Cortex-M3 Execute for lpc1700_Opt.Bak
..........\.............................\Cortex-M3 Execute for lpc1700_Uv2.Bak
..........\.............................\JLinkLog.txt
..........\.............................\ZY_CODE\firmware.h
..........\.............................\.......\zy_if\zy_if.c
..........\.............................\.......\.....\zy_if.h
..........\.............................\.......\Startup\lpc1700.h
..........\.............................\.......\.......\LPC1700PinCfg.c
..........\.............................\.......\.......\target.c
..........\.............................\.......\.......\target.h
..........\.............................\.......\.......\vector_table.c
..........\.............................\USER_CODE\main.c
..........\.............................\out\Cortex-M3 Execute for lpc1700.axf
..........\.............................\...\Cortex-M3 Execute for lpc1700.htm
..........\.............................\...\Cortex-M3 Execute for lpc1700.lnp
..........\.............................\...\Cortex-M3 Execute for lpc1700.plg
..........\.............................\...\Cortex-M3 Execute for lpc1700.tra
..........\.............................\...\lpc1700pincfg.crf
..........\.............................\...\lpc1700pincfg.d
..........\.............................\...\lpc1700pincfg.o
..........\.............................\...\main.crf
..........\.............................\...\main.d
..........\.............................\...\main.o
..........\.............................\...\rt_sys_c.crf
..........\.............................\...\rt_sys_c.d
..........\.............................\...\rt_sys_c.o
..........\.............................\...\rt_sys_s.o
..........\.............................\...\target.crf
..........\.............................\...\target.d
..........\.............................\...\target.o
..........\.............................\...\vector_table.crf
..........\.............................\...\vector_table.d
..........\.............................\...\vector_table.o
..........\.............................\...\zy_if.crf
..........\.............................\...\zy_if.d
..........\.............................\...\zy_if.o
..........\.............................\cfg_file\target_cfg.h
..........\.............................\........\zy_if\zy_if_cfg.h
..........\.............................\........\Startup\InChip.sct
..........\.............................\........\.......\LPC1700PinCfg.h
..........\.............................\........\.......\rt_sys_c.c
..........\.............................\........\.......\rt_sys_s.s
..........\.............................\........\.......\vector_cfg.h
..........\.............................\ZY_CODE\zy_if
..........\.............................\.......\Startup
..........\.............................\cfg_file\zy_if
..........\.............................\........\Startup
..........\.............................\ZY_CODE
..........\.............................\USER_CODE
..........\.............................\out
..........\.............................\cfg_file
..........\Cortex-M3 Execute for lpc1700
PWM_DblEdg
..........\Thumbs.db
..........\Cortex-M3 Execute for lpc1700\config.h
..........\.............................\Cortex-M3 Execute for lpc1700.map
..........\.............................\Cortex-M3 Execute for lpc1700.Opt
..........\.............................\Cortex-M3 Execute for lpc1700.Uv2
..........\.............................\Cortex-M3 Execute for lpc1700_DebugInFlash.dep
..........\.............................\Cortex-M3 Execute for lpc1700_Opt.Bak
..........\.............................\Cortex-M3 Execute for lpc1700_Uv2.Bak
..........\.............................\JLinkLog.txt
..........\.............................\ZY_CODE\firmware.h
..........\.............................\.......\zy_if\zy_if.c
..........\.............................\.......\.....\zy_if.h
..........\.............................\.......\Startup\lpc1700.h
..........\.............................\.......\.......\LPC1700PinCfg.c
..........\.............................\.......\.......\target.c
..........\.............................\.......\.......\target.h
..........\.............................\.......\.......\vector_table.c
..........\.............................\USER_CODE\main.c
..........\.............................\out\Cortex-M3 Execute for lpc1700.axf
..........\.............................\...\Cortex-M3 Execute for lpc1700.htm
..........\.............................\...\Cortex-M3 Execute for lpc1700.lnp
..........\.............................\...\Cortex-M3 Execute for lpc1700.plg
..........\.............................\...\Cortex-M3 Execute for lpc1700.tra
..........\.............................\...\lpc1700pincfg.crf
..........\.............................\...\lpc1700pincfg.d
..........\.............................\...\lpc1700pincfg.o
..........\.............................\...\main.crf
..........\.............................\...\main.d
..........\.............................\...\main.o
..........\.............................\...\rt_sys_c.crf
..........\.............................\...\rt_sys_c.d
..........\.............................\...\rt_sys_c.o
..........\.............................\...\rt_sys_s.o
..........\.............................\...\target.crf
..........\.............................\...\target.d
..........\.............................\...\target.o
..........\.............................\...\vector_table.crf
..........\.............................\...\vector_table.d
..........\.............................\...\vector_table.o
..........\.............................\...\zy_if.crf
..........\.............................\...\zy_if.d
..........\.............................\...\zy_if.o
..........\.............................\cfg_file\target_cfg.h
..........\.............................\........\zy_if\zy_if_cfg.h
..........\.............................\........\Startup\InChip.sct
..........\.............................\........\.......\LPC1700PinCfg.h
..........\.............................\........\.......\rt_sys_c.c
..........\.............................\........\.......\rt_sys_s.s
..........\.............................\........\.......\vector_cfg.h
..........\.............................\ZY_CODE\zy_if
..........\.............................\.......\Startup
..........\.............................\cfg_file\zy_if
..........\.............................\........\Startup
..........\.............................\ZY_CODE
..........\.............................\USER_CODE
..........\.............................\out
..........\.............................\cfg_file
..........\Cortex-M3 Execute for lpc1700
PWM_DblEdg