搜索资源列表
ARM的ADC
- 使用AIN0和AIN1测量两路直流电压，并将结果通过UART0想PC机发送。-compute and the use of two-way con measuring DC voltage, the results through UART0 sent to PC.
AD_Interrupt
- MSC 1210 A/D Conversion for 1 input signals (-2.5V ... +2.5V) Inputs pairs AIN0-AIN1 read in an interrupt service routine-MSC 1210 A / D Conversion for an input signals (-2.5V ... 2.5V) Inputs pairs compute-con read i
COMPARE(AT90S8535)
- 当AIN0引脚上模拟采样电压高于AIN1上模拟采样电压时，模拟比较器 输出置位，PORTA口高四位LED亮低四位LED灭；反之AIN0<AIN1时，PORTA 口高四位LED亮低四位LED灭。
ARM的ADC
- 使用AIN0和AIN1测量两路直流电压，并将结果通过UART0想PC机发送。-compute and the use of two-way con measuring DC voltage, the results through UART0 sent to PC.
AD_Interrupt
- MSC 1210 A/D Conversion for 1 input signals (-2.5V ... +2.5V) Inputs pairs AIN0-AIN1 read in an interrupt service routine-MSC 1210 A/D Conversion for an input signals (-2.5V ... 2.5V) Inputs pairs compute-con read in
COMPARE(AT90S8535)
- 当AIN0引脚上模拟采样电压高于AIN1上模拟采样电压时，模拟比较器 输出置位，PORTA口高四位LED亮低四位LED灭；反之AIN0<AIN1时，PORTA 口高四位LED亮低四位LED灭。-When AIN0 pin AIN1 analog sample voltage is higher than the analog voltage sampling, the analog comparator out
S3C44B0XADconverterapplication
- 采集AIN0和AIN1的信号，通过可调电阻，使输入的模拟信号发生改变，来进行A/D转换。为保证数据的准确性，通常采集10次以上，在求平均值。A/D转换器采集AIN0和AIN1的信号,并显示出来。 S3C44B0X的ADC为10bit，采样信号变化为数字0~1023。-Acquisition AIN0 and AIN1 signal, through an adjustable resistance, making the imp
S3C44B0XADconverterapplication
- 采集AIN0和AIN1的信号，通过可调电阻，使输入的模拟信号发生改变，来进行A/D转换。为保证数据的准确性，通常采集10次以上，在求平均值。A/D转换器采集AIN0和AIN1的信号,并显示出来。-AIN1 acquisition and AIN0 signal, through an adjustable resistor, so that the analog signal input to change, to carry out
AD8bitswitch
- 参考程序B.WADC1.c程序模/数转化通道AIN1.0的输入值-B.WADC1.c procedure reference procedures for A/D conversion value of channel input AIN1.0
adc_ts
- s3c2440上的AD程序，本程序提供一个菜单，可以从中选择测试ADC或触摸屏。测试ADC时，程序不断测量AIN0,AIN1的电压，并在串口上显示出来。当测试触摸屏时，只是测试按下松开事件，并把采集到的X,Y坐标打印出来。-s3c2440 on the AD program, this program provides a menu, you can choose from ADC or a touch screen test. ADC
s3c2440_adc
- s3c2440的ADC驱动，使用的AIN1模拟输入口，还有应用测试程序，经过长时间测试，没有问题，放心使用。-s3c2440 the ADC driver, use the AIN1 analog input port, there are application testing procedures.
Lab23_AD
- 测量连接在P0.27,P0.28引脚上的AIN0,AIN1的模拟量输入端的两个电位器可调的直流电压,将模拟量转换成数字量送LED数码管显示-Measurement connected to the P0.27, P0.28 pin AIN0, AIN1 analog inputs of the two DC voltage adjustable potentiometer, the analog into a digital numbe
adc
- 掌握S3C2410A的模/数(A/D)转换器的应用设置，进行电压信号的测量.使用AIN0和AIN1测量两路直流电压，并将测量结果通过UART0向PC机发送.-NC divider based on VHDL language, the designer can modify the frequency coefficient code
TI-MSC1200
- The AD4INPUT program reads the four input pairs AIN0-AIN1, AIN2-AIN3, AIN4-IN5, AIN6-AIN7 of the MSC121x and outputs the values along with other A/D relevant information via the serial interface.-The AD4INPUT pro
adc
- 基于linux2.6.12的ADC驱动，用的是AIN1，查询方式，已通过测试-Based on linux2.6.12 ADC driver, using a AIN1, query methods, has been tested
led-key
- 在Linux操作系统和ARM嵌入式实验系统环境下，分析linux下的键盘、LED驱动程序，编写一个应用程序，实现以下功能：在ARM开发板上按下数字键1、2、3时，对应启动模拟量AIN0、AIN1、AIN2采样，并把AD转换的结果从终端输出和LED显示。-Environment of the Linux operating system and ARM embedded experiment system, the Linux keybo
TI-MSC121x
- The AD4INPUT program reads the four input pairs AIN0-AIN1, AIN2-AIN3, AIN4-IN5, AIN6-AIN7 of the MSC121x and outputs the values along with other A/D relevant information via the serial interface. This exampl
Adc
- mini2440裸机，修改部分程序使之成为采集AIN1通道，从而避免占据AIN0通道。-The mini2440 bare metal, modify part of the program of to become acquisition AIN1 channel, thereby avoid occupy AIN0 channel.
STM32F10x_AD7706_Example
- 模拟AD7706采集器SPI双通道采集，AIN1和AIN2的组合-Analog AD7706 dual-channel acquisition SPI collector, AIN1 and AIN2 combination
Adc100
- mini2440裸机，修改部分程序使之成为采集AIN1通道，从而避免占据AIN0通道。-The mini2440 bare metal, modify part of the program of to become acquisition AIN1 channel, thereby avoid occupy AIN0 channel.