搜索资源列表
Relay_Function_Test
- 此程序为本人在公司开发的继电器功能测试仪，用KEIL C编写。可以测试线圈电阻，接触电阻，吸合释放电压，时间等参数。采用WINBONG W77E58 单片机。-This procedure I developed Relay Functional Tester, using KEIL C preparation. To test the coil resistance, contact resistance, pull-release
0-5v
- 0-5V数字电压表汇编程序，本程序已通过调试，-0-5V digital voltage meter assembler, the program has passed through debugging,
SVPWM
- 基于DSP ti tms 320lf 2407的 电压矢量变频调速源程序 运行于 ti 公司的 ccs2.2 -Based on DSP ti tms 320lf 2407 VVVF voltage vector of the source code running on the ti
adc0809
- ADC0809数字示波器,可以任意改变参数,显示电压-ADC0809 digital oscilloscope can be arbitrarily changed parameters, shows voltage
equal-area-critirea
- E=input( enter the generator voltage: ) V=input( enter the infinite bus voltage: ) Gx=input( enter the reactance of generator: ) L1x=input( enter the line reactance: ) L2x=input( enter the line reactance: )
software_release
- TOP PORT (USB) 调试接口说明 本接口是利用PL-2303HX的USB转RS232的接口芯片设计实现了一个TTL(5V)的RS232串口，并且利用了PL-2303HX的2个GPIO口软件模拟了一个低速的I2C总线.该接口由USB接口提供5V电压，可自带2Kbit(24C02)数据备份EEPROM (单独读写通道,不占用I2C总线地址)。并可对外提供小于250mA的5V电压。尤其适合WIN-XP以后的没有并口和串口笔记本电
ch82
- 电源设计包括正负电源，可调电压源和可调电流源。-Power supply design, including positive and negative power supply, adjustable voltage and adjustable current source.
AD0809
- 数字电压表，实现0-5V的电压采集。 比较简单的-Digital voltage meter to achieve 0-5V voltage acquisition. Relatively simple
Escort_95
- 通过AT89C51的串行口通讯,能够读取Escort_95系列的数字式表头的电压和电流等信号.-AT89C51 through the serial port communication, able to read the series of digital Escort_95 table headers, such as voltage and current signals.
read_7135
- 利用AT89C51 ,可以读取基于IC7135的电压表头的信号. -Use AT89C51, can be read based on the voltage meter IC7135 first signal.
sample7804
- 可以利用AT89C51,对模数转换IC ADS7804能够显示出其电压值-Can make use of AT89C51, for analog-digital conversion IC ADS7804 can show that its voltage value
ADC1_func
- c8051f020的应用程序,主要为对ADC0的应用,使用其内置的温度传感器读取其片内温度值,并可以设置模拟输入口检测电压值-C8051F020 applications, mainly for ADC0 applications, using its built-in temperature sensor to read the chip temperature, and can set the analog input voltag
DIS_KEY
- 显示面板程序!用于电力系统的人机显示,可显示三相电流,电压.有功无功等-Display panel procedures! For man-machine power system show that shows the three-phase current, voltage. Active and reactive power, etc.
josephsonmatlab
- 本程序基于约瑟夫森结的RSJ模型，对无微波辐照和微波辐照下约瑟夫森结的特性进行了数值计算求解，其中有微波辐照的RSJ模型求解采用了四阶龙格库塔方程函数，两种情况都给出了I-V特性曲线图（程序包中也附带），展现了量子化电压台阶。-This procedure based on the RSJ Josephson junction model, no microwave radiation and microwave radiation c
AD
- 实现a/d模数转换，由一个电压值转化为数字并在数码管上显示出来-Realize a/d analog-digital conversion by a voltage value into digital and digital tube display
Freq_occur_ad_to_pwm
- 此程序是用CYPRESS单片机编写，功能是将电压信号转换为PWM信号-This procedure is used to prepare Singlechip CYPRESS, function is the voltage signal is converted to PWM signal
MCU_simulate_output
- 无刷直流电动机需要多种电压电平来控制转速：0V 使电动机停转，5V 使电动机以最大转速运转，而在0V和5V之间的电压则使电动机以较低的转速运转-The needs of a wide range of brushless DC motor voltage level to control the rotational speed: 0V stop the motor switch, 5V maximum speed of the mot
shuokongzhiliuwenyadianyuan
- 单片机实现直流数控稳压电源,可调电压为0-9.9伏,步进为0.1伏-NC regulators realize single-chip DC power supply, adjustable voltage of 0-9.9 V, step 0.1 V
copy_AD
- 基于ARM的电压控制,且有两级调制,可以实现精确的电压输出-ARM-based voltage control, and has two modulation, can achieve precise voltage output
0809ybj2
- ad转换0809的引用实例，次程序调试过，用作数字电压表，精度还不错。-ad conversion of the quoted examples of 0809, sub-program debugging, and used as a digital voltage meter, accuracy was not bad.