搜索资源列表
ds1307
- ds1307 driver by c clock chip
EBD9200-DS1307
- at91rm9200 与 ds1307 的接口程序
Interface DS1307 RTC IC with 8051
- Interface DS1307 RTC IC with 8051
DS1307
- ds1307时钟芯片汇编语言程序代码，可校准、查询时间，每年误差不大于一分钟。
DS1307 汇编
- DS1307驱动，汇编
ds1307电子钟
- ds1307电子钟
ds1307(I2C)
- I2C控制参考例程。 I2C控制参考例程。-reference I2C control routines. Re ference I2C control routines.
main_c
- 实现时间定时功能 用DS1307芯片显示年\月\日 并有报警信息!可以下载来直接应用-time-timing function using DS1307 chips showed, \ on \ Day and alarm information! Can be downloaded to direct application! !
DS1302+162A+18b20+M8515
- DS1302+162A+18b20+M8515做的温度时钟显示程序 具体的引脚接线,在头文件里有的.给有需要的朋友参考. 已经调试好了I2C接口DS1307+162A+18b20+M16的程序-DS1302 348C 18b20 M8515 clock so the temperature indicated the specific procedures of the pin then line In the first
ds1307_picc
- ds1307的程序，使用pic单片机。-ds1307 procedures, the use of pic microcontroller.
ds1307
- 本程式通过4*4键盘的输入控制步进马达的正转和反转,停止转动以及加速和减速.-the program through 4* 4 keyboard input to control stepper motors and the switch is turned around, stop turning and accelerating and decelerating.
lcd
- 这是一个液晶显显程序!实现时钟(ds1307实现)!-This is a significant procedure significantly LCD! Achieve Clock (ds1307 achieve)!
STC
- 本设计采用STC单片机实现对时钟芯片DS1307及128x64LCD的控制，系统由STC单片机控制部分和时钟芯片及液晶显示部分组成。该系统由单片机作为主控机控制各个模块的运行，报时、定时准确并能够在LCD上清晰的显示万年历、温度。除此以外，该系统还能够进行简单的单片机实验，包括程序下载、串口调试等。-This design uses a single-chip realization of STC on the clock chip D
clock
- 该代码利用pic单片机和时钟芯片ds1307实现了时钟的功能，程序通过了proteus的仿真-The code to use pic MCU and clock chip DS1307 achieved a clock function, the procedure adopted Proteus Simulation
ds1307_51
- DS1307 with MC51 KEIL compiler
VCG21
- DS1307 with PIC16F84A application
ds1307
- rtc 1307的驱动源代码，内置ram,keyi-rtc 1307 driver source code, built-ram, keyi
TimerSystem
- 智能打铃系统（MCU)端程序，包含DS18b20驱动，12864LCD驱动（绝对好用），DS1307时钟芯片驱动-Smart play bell system (MCU) client procedures, including DS18B20 drive, 12864LCD drive (absolute ease of use), DS1307 clock chip driver
real_clock
- DS1307的通讯实验，包括preture仿真-DS1307 communication experiments, including simulation preture
DS1307_LCD
- 通过IIC总线读写实时时钟DS1307，并把时、分、秒显示在12864液晶屏上，用的CycloneII EP2C8，Quartus环境-Through the IIC bus read and write real-time clock, DS1307, and the hours, minutes and seconds displayed on the LCD screen on the 12864, used CycloneII