搜索资源列表
LedLight
- LED数码管驱动开发例程，基于51单片机，包括pc端程序-LED digital tube Driver Development routines, based on 51 MCU, including the pc-procedures
spiled
- 本程序为数码管显示处理模块 占用I/O RC3,RC4,RC5 使用RAM 节 程序包括: InitSPI 初始化SPI子程序 LEDlight 送七段码显示子程序 入口参数 LED_DATA 出口参数 无
LedLight
- LED数码管驱动开发例程，基于51单片机，包括pc端程序-LED digital tube Driver Development routines, based on 51 MCU, including the pc-procedures
spiled
- 本程序为数码管显示处理模块 占用I/O RC3,RC4,RC5 使用RAM 节 程序包括: InitSPI 初始化SPI子程序 LEDlight 送七段码显示子程序 入口参数 LED_DATA 出口参数 无-This procedure for the digital display processing module occupied I/O RC3, RC4, RC5 use RAM se
ledlight
- 利用mfc编制的简单的led交通灯和部分交通标志，对初学者有帮助，红绿灯双击左键可以定时闪动-Mfc prepared using simple led traffic lights and some traffic signs, help for beginners, timing traffic lights can double-click the left button flashing
ledlight.c
- led摇摇棒设计程序，单片机开发可用，手摇16*4阵列的led，根据摇的速度不同变换显示内容。-shook rods led the design process, microcontroller development is available, 16* 4 array of hand-led, according to the speed of shaking in different transformation display
LEDlight
- 基于51单片机 的 led流水灯程序代码-Based on 51 microcontroller code led water lamp
ledlight
- 这是一个单片机实验程序，它的主要功能是点亮一点等。使用的时候用Keil来运行即可。-This is a single chip experimental procedure, its main function is to light up a bit and so on. You can use Keil to run it.
LEDLight
- 基于Static控件的LED灯控件 可以实现LED灯的一闪一闪的功能 -LED lights Based on Static Control can control LED lights flashed on and off function
interrupt_LED
- 单片机外部中断发生前，8个LED一起交替闪烁；外部中断产生后，LED呈流水灯状，交替闪烁-MCU interrupt LEDlight
pinlvji_LCD1602
- 一个完整的已经过测量和验证的VHDL程序，测量范围从1Hz到1GHz的频率计，也可以当做计数器，通过LCD1602显示频率值，四路独立按键可以控制输出不同的频率值、控制对应的独立LED亮灭、控制蜂鸣器发声。输入的晶振频率是25MHz,不符合请自行在倍频器中更改参数。-Has been a complete VHDL program measurement and verification, measurement range from
ledlight
- 强大的LED控制程序，各种闪烁的控制，绚丽的图案，够震撼-Powerful LED control procedures, control of a variety of flashing, colorful patterns, enough to shock
LEDLight
- LED闪烁，界面设计，定时器使用，指示灯输出效果-LED flashes, interface design using the timer, the light output effect
ledlight
- C程序LED流水灯点亮代码，使用P0口流水点亮8位LED，是一段实用的代码，而且代码也较少。-C program LED lights light up the code, use the P0 port running water is lit 8 LED is a period of practical code, and the code is less.
LEDlight
- 如果你使用的是USB 摄像头，那么请参考Error! Reference source not found.Error! Reference source not found.，运行imaqUSB examples.llb 中的Grab.vi。在软硬件正常工作的 情况下，可以看到从USB 摄像头中传出的图像，如Error! Reference source not found.所示。 在进行机器视觉系统开发前，我们通常都会如
2.4G-LEDlight
- 2.4G无线led调光实例，实现记忆关灯，分段模式-2.4 G wireless led dimming instance, remember to turn off the lights, segmented mode
LEDlight
- LED流水灯，实现间隔性闪烁，可控制间隔时间。-LED running lights, interval gleam, you can control the time interval.
ledlight
- led灯循环点亮, yongyukaifac51danpianji-The led lighting cycles,The led lighting cycles,The led lighting cycles
ledLight
- 简单的流水灯小程序，Labwindows/cvi入门助手-Simple water lights small program, Labwindows/cvi entry assistant
LEDlight
- LED点亮程序，控制MCU输出高电平和低电平(LED light using C8051F310 Silicon IDE)