搜索资源列表
mmc-sd
- 一个建立在C51基础上的SD卡读写驱动程序.-C51 in a building on the basis of the SD Card Reader driver.
SD
- 该文件为S3C44B0硬件平台配置具体函数的初始化及其SD卡读写程序
SD-read
- LPC2142 的SD卡读写程序，是MCU123网站的写的，LPC2142芯片
SD
- 这是一个SD卡读写的子程序，大家共享一下！
SD-CARD-P-FAT32
- 配合SD卡读写驱动实现对SD卡中的文本文件的读取，并将读到的数据通过串口输出到串口终端上，这里使用的是超级终端-SD card reader with SD card drive to achieve a text file to read, and read the data through the serial port output to the serial port terminal, where using HyperTer
51-MCU-SD-Card
- 51单片机实现SD卡读写程序，实验过，很好用-51 MCU SD card reader program, experimented with, very good use
sd
- STC8951 通过SPI总线读写SD卡程序。 KEIL C 开发环境，包含SPI通信协议，SD卡读写格式等，-STC8951 read and write SD card via SPI bus program KEIL C development environment, including the SPI communication protocol, SD card reader format
SD-card
- 51单片机的SD卡读写程序，程序调试成功，可直接使用，方便移植。-51 microcontroller SD card reader program, debugging success can be directly used to facilitate the transplant.
SD-Fatfs
- ＴＭＳ３２Ｆ２８３３５实现ＳＤ卡读写程序，带Ｕ盘系统(TMS32F28335 SD card to read and write procedures, with U disk system)
实验38 SD卡实验
- STM32 的sd卡读写程序，适合STMF4系列(STM32 SD card read and write procedures, suitable for STMF4 series)
STM32F1XX代码工程：：sd卡读写（库函数）
- STM32F10X系列DSP源代码工程文件：SD卡读取(STM32F10X series DSP source code engineering file: SD card read)
STM32 SD读写实验
- STM32F103RCT6 读写SD卡的操作过程,已经测试没有问题(F103 read and write SD card operation process)
SD卡
- 基于ATmega128的sd卡的读写程序，可以实现大容量和小容量的读写(Based on ATmega128 SD card read and write program, you can read and write large capacity and small capacity)
SD卡测试
- SD卡读写测试的程序 啊啊啊啊啊啊 字数字数补丁(acjbv wdvbsdfjkbn fm,nfg,bn ,bdf,ghmn trsbasf)
SD卡资料
- SD卡初始化，及读写流程，以及SD卡上文件系统介绍，及51MCU FAT32文件系统程序(The SD card initialization, and the reading and writing process, as well as the file system introduction on the SD card, and the 51MCU FAT32 file system program)
SD卡测试
- 基于单片机SPI读取SD卡，51单片机实现SD卡的读写(Read SD card based on MCU SPI, read and write SD card by 51 MCU.)
sdcard
- 使用fpga实现对sd卡的读写，仅有源码，纯verilog编写，完全通用(Using FPGA to read and write SD card, only source code, pure verilog, completely universal)
单片机读写SD卡
- 利用51单片机，模拟SPI通信，实现对SD卡的数据读写(Data Reading and Writing of SD Card Using 51 Single Chip Microcomputer)
STM32F10x工程_使用SPI方式读写TF卡SD卡
- stm32f103c8t6 spi 读取/写入SD卡(stm32f103c8t6 spi read write SD card)
SD卡
- 完成S3C2440中的SD卡的裸机驱动，初始化S3C2440 SD卡控制器，能够完成SD卡的识别、分类、读写等操作(Complete the bare driver of SD card in S3C2440, initialize the controller of S3C2440 SD card, and complete the identification, classification, reading and writing