搜索资源列表
sja1000-driver
- arm扩展can总线的驱动程序-arm can extend Bus Driver
SJA1000_avr
- 单片机对SJA1000的驱动，包括初始化，收发数据，中断- MCU drive for SJA1000(include initial,transmit and receive data,interruption and so on)
BasicCANV1
- Can总线控制器sja1000的源程序,很有参考价值-Can Bus Controller sja1000 source, great reference value
51+SJA1000
- 用89C51来控制SJA1000的源码程序，C语言编写-SJA1000 with 89C51 to control the source process, C language
MCU_CAN_SJA1000_PELI_library
- 基于MCU的CAN程序库SJA1000_PELI库-MCU based on the CAN library SJA1000_PELI Library
sja1000
- 可以实现在PC与CAN总线的连接。采用的89C51和SJA1000芯片的接法。里面包括原程序的电路斩-Can be achieved in the PC and CAN bus connection. Used 89C51 and SJA1000 chip connection. Procedures which include the original circuit Tsam
CAN_bus
- CAN总线控制，SJA1000基本操作，keilC51开发环境-CAN bus control, SJA1000 basic operation, keilC51 Development Environment
uart_inttrupt
- 基于STM32串口-CAN函数包.其中,串口以中断形式接受,C-Based on the STM32 serial-CAN function package. Among them, the serial port to break the form of acceptance, C
ATmega64_SJA1000
- 开发环境为GCC,AVR单片机与SJA1000实现CAN通讯。-Development environment for the GCC, AVR Microcontroller and the realization of CAN communication SJA1000.
CAN_IP
- 这是CAN总线控制器的IP核，源码是由Verilog HDL编写的。其硬件结构与SJA1000类似，满足CAN2.0B协议。-This is a IP core of the CAN bus controller written by the Verilog HDL. whose structure is similar with SJA1000,supporting the protocol of CAN2.0B.
code2
- CAN总线之saj1000与82c250应用源程序，基于c8051f340单片机平台-CAN bus and the 82c250 application saj1000 source, based on single-chip platform c8051f340
WINCE_CAN
- 周立功公司wince下SJA1000的CAN总线驱动-the zlgmcu CAN Bus diiver of SJA1000 for wince
sja1000-can
- 基于SJA1000的CAN节点设计PDF资料,基于SJA1000应用设计电路,及基于SJA1000的源程序代码-SJA1000 based CAN node design of the PDF data, based on the SJA1000 application design circuit, and the source code based on the SJA1000
SJA1000
- 讲述基于单片机和can控制器的开发例子，里面介绍了基本的程序，pelican函数的定义，寄存器的定义-Controller based on single chip and can talk about the development of an example, which describes the basic procedure, pelican function definition, the definition of reg
BasicCAN
- 基于STC单片机和SJA1000独立CAN控制器BasicCan工作模式点对点通信程序，此程序是我的实验程序，拿来就可以用里面都有详细的中文注释很适合想研究CAN的朋友拿来参考-STC-based microcontroller and CAN controller SJA1000 independent BasicCan mode of point to point communication program, this progra
CAN--for-FPGA
- FPGA控制SJA1000实现CAN协议 适合深入学子FPGA的学生 很不错-FPGA control the SJA1000 CAN protocol for in-depth realization of the students are very good students FPGA