资源列表
排序选择:
[其他嵌入式/单片机内容] saveToUSB_mbedppBOARD_uvision5_lpc1768
说明:save txt file to usb using mbed application board<mxagri > 在 2025-07-28 上传 | 大小:1.42mb | 下载:0
[matlab例程] dqwgg
说明:For time-frequency analysis algorithm, Including the final calculation of the compressed image peak signal to noise ratio and compression of the source, Rapid expansion of random spanning tree algorithm.<qaofiefang > 在 2025-07-28 上传 | 大小:7kb | 下载:0
[系统编程] zyskn
说明:基于STMP电子邮件的VC++版本,可进行邮件手法 不错的源码(Based on vc + + STMP E-mail version, mail can be good source)<cqmparashx > 在 2025-07-28 上传 | 大小:23kb | 下载:0
[单片机(51,AVR,MSP430等)] ultranging
说明:读取ds18b20温度,并在LCD上显示(Read the DS18B20 temperature and display on the LCD)<qqy > 在 2025-07-28 上传 | 大小:2kb | 下载:0
[汇编语言] (在两个中)识别最大模拟输入通道
说明:(在两个中)识别最大模拟输入通道 利用0809采集两路模拟电压,将电压值最大的通道号显示在LED显示器上。(硬件电路参见AD_CH2_1.DSN)。((in two) identifying the maximum analog input channel Using 0809 to collect two analog voltage, the voltage value of the largest channel number is displayed on the LED displ<zpy434 > 在 2025-07-28 上传 | 大小:59kb | 下载:0
[汇编语言] PWM波发生器
说明:在硬件电路PWM.DSN中实现P1.7输出PWM波。周期T=100ms,初始占空比(T1/T)为50%,按键KEY1每次增加占空比10%(直到90%),KEY2每次减小占空比10%(直到10%)。(In hardware circuit PWM.DSN, P1.7 output PWM wave is realized. The cycle T=100ms, the initial duty cycle (T1/T) is 50%, the key KEY1 increases by 10% e<zpy434 > 在 2025-07-28 上传 | 大小:38kb | 下载:1
[其他小程序] RxJava2RetrofitDemo-master
说明:MVP 小型框架--展示实时新闻--结构清晰--开发简单(MVP -- Open source development)<欧阳明日 > 在 2025-07-28 上传 | 大小:255kb | 下载:0
[汇编语言] 3X3键盘扫描
说明:利用8155的PB、PC口实现3X3键盘扫描(硬件电路参见3X3KEY_8155.DSN)。当1~8号键独立按下时,连接在PA口对应的LEDx点亮(即1号键按下时LDE1亮,2号键按下时LDE2亮),当9号键按下时,所有LED点亮,当没有键按下时,所有LED熄灭。(3X3 keyboard scanning with 8155 PB and PC ports (hardware circuit, see 3X3KEY_8155.DSN). When the 1~8 button is press<zpy434 > 在 2025-07-28 上传 | 大小:117kb | 下载:0