资源列表
[单片机(51,AVR,MSP430等)] SHT11-51
说明:温湿度传感器sht11数据读取,数码管显示,-reading the data from the sensor of sht11<陈作鹏> 在 2025-06-18 上传 | 大小:38kb | 下载:0
[VHDL编程] verilog_led_run
说明:采用verilog编写的FPGA程序,程序的功能是跑马灯,芯片型号是EP2C35F484C7,时钟50MHz。-based on chinese descripion.<muliubing> 在 2025-06-18 上传 | 大小:386kb | 下载:0
[单片机(51,AVR,MSP430等)] WK18B20
说明:数字温度传感器18B20程序,LED显示,Proteus仿真-18B20 program of the digital temperature sensor, LED display, the Proteus simulation<辛哥> 在 2025-06-18 上传 | 大小:57kb | 下载:0
[VHDL编程] Linux-Xilinx-FPGA-in-the-transplant
说明:Linux Xilinx FPGA in the transplant教你如何将linux移植到XILINX fpga上面。-Linux Xilinx FPGA in the transplant will teach you how to transplant Xilinx FPGA to Linux on it. Linux Xilinx FPGA in the transplant<孙洪君> 在 2025-06-18 上传 | 大小:428kb | 下载:0
[VHDL编程] verilog_sw_led
说明:采用verilog编写的FPGA程序,程序的功能是按键按键消抖,quartus II 开发。芯片型号是EP2C35F484C7,时钟50MHz。-FPGA verilog to write the program, the program function is the key button is debounced, quartus II development. The chip model is EP2C35F484C7, clock 50MHz<muliubing> 在 2025-06-18 上传 | 大小:403kb | 下载:0
[微处理器(ARM/PowerPC等)] simulate
说明:压控阀控制系统,L298驱动直流电机,控制阀门开关,proteus 仿真,LED显示电机转数,-Voltage-controlled valve control system, the L298 to drive DC motor, control valve switch, proteus simulation, LED display motor revolutions.<辛哥> 在 2025-06-18 上传 | 大小:81kb | 下载:0
[单片机(51,AVR,MSP430等)] 485P51simulate
说明:MAX485通信程序,主机、从机程序,protues仿真。-MAX485 communication program, the host, the slave program protues simulation.<辛哥> 在 2025-06-18 上传 | 大小:46kb | 下载:0
[uCOS开发] uCOS_ppp
说明:本文提出了基于ARM7TDMI处理器的μC/OS-II操作系统上PPP协议的设计与实现。通过PPP协议在μC/OS-II上的实现[5,6],能让嵌入式设备接入Internet,进行信息互访,-at this article, based on the ARM7TDMI processor, μC/OS-II operating system on Design and Implementation of the PPP protocol. Achieve by the PPP protocol<焦林敬> 在 2025-06-18 上传 | 大小:8kb | 下载:0
[单片机(51,AVR,MSP430等)] yejingxianshi
说明:HT单片机66F系列,显示屏显示最基本的程序-HT single-chip microcomputer 66 F series, screen shows the most basic program<李雷> 在 2025-06-18 上传 | 大小:1kb | 下载:0
[单片机(51,AVR,MSP430等)] MAX485PC51-simulate
说明:485通信程序,保护电路电路设计,带光耦保护和失效保护,Proteus仿真通过。-485 program, the protection circuit circuit design with optocoupler protection and fail-safe, Proteus simulation through.<辛哥> 在 2025-06-18 上传 | 大小:86kb | 下载:0
[其他嵌入式/单片机内容] bujinji
说明:步进电机实验程序,包括步进电机部分功能的实现-Stepper motor experimental procedures, including the stepper motor part of the function<李玉东> 在 2025-06-18 上传 | 大小:1kb | 下载:0