资源列表
[其他嵌入式/单片机内容] G
说明:重力加速度计ADXL313倾角测量程序,C8051F041通过I2C进行读写控制,实测有效,倾角分辨率小于1度。-Gravity accelerometer ADXL313 angle measurement procedure, C8051F041 controlled via I2C read and write, found effective resolution of less than 1 degree inclination.<samson> 在 2025-11-13 上传 | 大小:2kb | 下载:0
[单片机(51,AVR,MSP430等)] NRF905send
说明:nrf905的发送程序 接收程序只需改动主函数中的调用子函数-nrf905 sending program receive program simply change the main function calls Functions<韩锋> 在 2025-11-13 上传 | 大小:2kb | 下载:0
[DSP编程] ADS1256
说明:在28335环境下的ADS1256配置文件,之前下载的延时都有问题,这个是改好的 应该有一定的参考价值-In the 28335 environment ADS1256 profile before downloading the delay has a problem, this is a good change there should be some reference value<liuxinming> 在 2025-11-13 上传 | 大小:5kb | 下载:0
[DSP编程] DAC1220E
说明:基于28335的DAC1220E配置文件,之前网上没有找到。主程序中还需要初始化后才可以使用-28335 of DAC1220E based configuration file is not found before the Internet. The main program also needs to be initialized before you can use<liuxinming> 在 2025-11-13 上传 | 大小:3kb | 下载:0
[单片机(51,AVR,MSP430等)] EX04_SPILED
说明:DXP芯片有关LED显示的演示代码,条理清晰,供大家有需要的下载参考-DXP chip LED display of the demo code, a clear, for everyone to download reference<shangwei> 在 2025-11-13 上传 | 大小:275kb | 下载:0
[单片机(51,AVR,MSP430等)] 7-21-STC12
说明:stc12 接入屏幕自动检测波形峰峰值,波形斜率-STC12 access screen automatically detect the waveform peak, waveform slope<WR> 在 2025-11-13 上传 | 大小:117kb | 下载:0
[单片机(51,AVR,MSP430等)] STC12-18b20
说明:基于STC12的18B20温度检测程序 屏幕为OLED12864 1.3寸-STC12 based 18B20 temperature detection program screen for OLED12864 1.3 inch<WR> 在 2025-11-13 上传 | 大小:49kb | 下载:0
[单片机(51,AVR,MSP430等)] motor
说明:步进电机驱动源码(包含加减速,细分等功能)-Stepper motor driver source code (including acceleration and deceleration, subdivision and other functions)<bolin> 在 2025-11-13 上传 | 大小:7kb | 下载:0
[单片机(51,AVR,MSP430等)] i2cdevlib
说明:mpu6050 的函数库,可以实现dmp功能<wolfray> 在 2025-11-13 上传 | 大小:1.43mb | 下载:0
[单片机(51,AVR,MSP430等)] AD9833
说明:ad9833 datasheet ad9833 datasheet-ad9833 datasheet ad9833 datasheet<回繁宁> 在 2025-11-13 上传 | 大小:288kb | 下载:0
[DSP编程] SolarMicroInv_F2803x
说明:这是TI公司的一个关于光伏并网的dsp程序。-This is a DSP program of TI company,which is used in grid-connecd of solar inverter.<梁劲> 在 2025-11-13 上传 | 大小:37kb | 下载:0
[VHDL编程] 02_run_flash_led
说明:在这一个实验,我们要以上图作为基础,建立一个并行操作的流水灯模块。扫描频配置定为100 Hz,而每一个功能模块在特定的时间内,将输出拉高。-In this experiment, we should above figure as the foundation, set up a parallel operation of flowing water light module. Scanning frequency configuration at 100 Hz, and each functi<杨军利> 在 2025-11-13 上传 | 大小:4.73mb | 下载:0