资源列表
[VHDL编程] car
说明:用VHDL实现的红外循迹小车程序,采用8个红外二极管(装在车头底部)识别路况,接L298电机驱动电路,能跑白色背景下的黑色赛道,且能应付道路分叉,孤岛及自启动等。-Implemented using VHDL infrared tracking car program, using eight infrared diodes (mounted on the front of the bottom) to identify traffic, then L298 motor driver circu<jizhen> 在 2025-06-19 上传 | 大小:629kb | 下载:0
[VHDL编程] tiaozhijietiaoqi
说明:调制解调器(全数字)vhdl程序,包含工程文件可直接编译-Modem (digital) vhdl program, including project files can be directly compiled<赵童> 在 2025-06-19 上传 | 大小:629kb | 下载:0
[VHDL编程] jipinqicepinzhou
说明:计频器有两种测量方法,即测频和测周,我们提出选用测频的方法,但是有时老师也会让我们编写可以选用测频、测周并且两者可以自动选择的程序,本程序即可达到这个要求。-Frequency meter, there are two measuring methods, that is, the frequency measurement and test week, we put forward to use frequency measure, but sometimes the teacher will<amy> 在 2025-06-19 上传 | 大小:629kb | 下载:0
[VHDL编程] RPDPDemo-AV_2C35
说明:red2_35 vedio 采集和vga显示程序,已经编译通过-red2 35 vedio image<guqiutao> 在 2025-06-19 上传 | 大小:629kb | 下载:0
[VHDL编程] cla16
说明:16位超前进位加法器的源代码,整个工程文件都有,是在ISE10.1下建立的,可以帮助理解超前进位原理(对了,是Verilog的,因为上面没看到只好选VHDL了)-16-bit look-ahead adder the source code files have the whole project was established under the ISE10.1 to help understand the lookahead principle (By the way, is the Ver<nikis> 在 2025-06-19 上传 | 大小:629kb | 下载:0
[VHDL编程] vivado_LED_Flow
说明:本例程使用vivado2014.4工具,利用xilinx Basys3 实验板实现板载流水灯的两种模式控制。-This project uses verilog HDL to realize the the control of 16 leds loaded on Xilinx Basys3 board.<姚罡> 在 2025-06-19 上传 | 大小:628kb | 下载:0