[数学计算/工程计算] Development-of-detailed-AF05pile-hybrid-III-dummy

说明：This paper describes a development of the Hybrid III AF05 ile dummy FE model to be used for frontal crash simulations. The precise geometries of the dummy were measured at a pitch of 1.0 mm using X-ray CT scans. The material properties and the
<Tianma> 在 2025-06-26 上传 | 大小：924kb | 下载：0

[数学计算/工程计算] Development-of-frequency-domain-dynamic-and-acous

说明：A set of new features for frequency domain dynamic and acoustic computation have been implemented in LS-DYNA. They include random vibration and high-cycle fatigue analysis, frequency response functions, steady state dynamics, response spectrum ana
<Tianma> 在 2025-06-26 上传 | 大小：621kb | 下载：0

[数学计算/工程计算] Efficient-nonlinear-multi-scale-modeling

说明：Efficient nonlinear multi-scale modeling of composite structures Thibault Villette, Jan Seyfarth, Roger Assaker, Laurent Adam
<Tianma> 在 2025-06-26 上传 | 大小：2.89mb | 下载：0

[数学计算/工程计算] Efficient-processing-of-multiple-contacts-in-MPP-

说明：Complex models often contain more than just a few contact interfaces. The decomposition of such a model can result in an uneven distribution of these contacts among the available processors. Some contacts may lie wholly on a single processor, whi
<Tianma> 在 2025-06-26 上传 | 大小：492kb | 下载：0

[数学计算/工程计算] Failure-modeling-of-a-self-piercing-riveted-joint

说明：Besides the basic product requirements, the aspect of energy efficiency is in the center of automobile engineering. A mixture of different light weight materials like aluminium and higher strength steels
<Tianma> 在 2025-06-26 上传 | 大小：1.76mb | 下载：0

[数学计算/工程计算] FEM-study-of-metal-rolling-in-grooved-rolls

说明：LS-DYNA was used to model the rolling process in grooved rolls. One-pass and two-pass (with rotation of the metal sheet at 90° a fter first pass) rolling in grooved rolls, as well as four-pass rolling in plain rolls and various combinations of
<Tianma> 在 2025-06-26 上传 | 大小：300kb | 下载：0

[数学计算/工程计算] Finite-element-analysis-of-localised-impact-loadi

说明：This paper investigates low velocity impact involving a glass fibre-reinforced polyamide engine oil pan as part of a complete new development of thermoplastic components. The assessment of the impact resistance has driven the need to employ LS DYNA f
<Tianma> 在 2025-06-26 上传 | 大小：385kb | 下载：0

[数学计算/工程计算] Finite-element-dynamic-simulation

说明：Side impact accidents against a tree or pole remainthe most dangerous accident scenarios in rally cars. Statistical data shows that 52 of the fatalities between 2004 and 2009 concern crashes against a rigid pole by the track sides, whilst among
<Tianma> 在 2025-06-26 上传 | 大小：783kb | 下载：0

[数学计算/工程计算] Hail-impact-simulation-on-CFC-covers-of-a-transpo

说明：Due to increasing weight saving requirements in new aircraft, structures traditionally built from aluminium alloys are increasingly replaced by carbon bre reinforced Composites (CFC).
<Tianma> 在 2025-06-26 上传 | 大小：1.53mb | 下载：0

[数学计算/工程计算] How-to-use-LS-OPT-for-parameter-estimation

说明：The “direct” heat transfer problem is one inwhich material properties and boundary conditions are specified, and LS-DYNA [1] is used to calculate the temperature response of the nodes in the mesh.
<Tianma> 在 2025-06-26 上传 | 大小：276kb | 下载：0

[数学计算/工程计算] Hypervelocity-impact-of-aluminium-sphere

说明：High velocity impact of 3 mm diameter aluminium sphere against thin aluminium target plate has been performed at impact velocity of about 4000 m/s withthe two stage light gas gun HERMES at Thiot Ingenierie laboratory
<Tianma> 在 2025-06-26 上传 | 大小：991kb | 下载：0

[数学计算/工程计算] Impact-simulations-on-concrete-slabs-LS-OPT-fitti

说明：This paper is based on a work realized for an international OECD benchmark initiated by IRSN and CNSC. The main goal of IRIS_2010 Benchmarkwas to uate the ability of simulation to reproduce experimental tests of impacts on concrete slabs for tw
<Tianma> 在 2025-06-26 上传 | 大小：231kb | 下载：0