MM32开发板活动资料
1 个标准的 JTAG/SWD 调试下载口
1 个电源指示灯（蓝色）
2 个状态指示灯（DS0:红色，DS1 :绿 色 ）　
1 个 IIC 接口的 EEPROM 芯片，24C08，容量 1024 字节
1 个　SPI FLASH　芯片，S25F008A，容量为　1M 字节（即　8M bit)
1 个标准的 2.4/2.8/3.5/4.3/7 寸 LCD 接口，支持触摸屏
1 个 OLED 模块接口（与 LCD 接口部分共用）
1 个 USB 串口接口，可用于程序下载和代码调试
1 个 USB SLAVE 接口，用于 USB 通信
1 个 Micro-SD 卡接口
1 个 PS/2 接口，可外接鼠标、键盘
1 组 5V电源供应/接入口
1 组 3 . 3V电源供应/接入口
1 个启动模式选择配置接口
1 个 2 . 4G无线通信接口
1 个 RTC 后备电池座，并带电池
1 个复位按钮，可用于复位 MCU和 LCD(1 standard JTAG/SWD debug Downloads
1 power indicator light (blue)
2 status indicator (DS0: red, DS1: green)
The 1 IIC interface's EEPROM chip, 24C08, has a capacity of 1024 bytes.
The 1 SPI FLASH chip, S25F008A, has a capacity of 1M bytes (8M bit).
The 1 standard 2.4/2.8/3.5/4.3/7 inch LCD interface supports touch screen.
1 OLED module interfaces (shared with LCD interface part)
1 USB serial interface, can be used for program downloading and code debugging.
1 USB SLAVE interfaces for USB communication
1 Micro-SD card interfaces
1 PS/2 interface, external mouse, keyboard
1 sets of 5V power supply / access ports
1 sets of 3.3V power supply / access ports
1 boot mode selection configuration interface
1 2.4G wireless communication interfaces
1 RTC back-up battery pedestal and battery
1 reset buttons that can be used to reset the MCU and LCD)