搜索资源列表
_綯 _
- 异步电动机变频调速系统（VVVF系统） 变频调查的基本控制方式 三相异步电机定子第相电动势的有效值-asynchronous motor control system (VVVF System) Frequency survey the basic control of three-phase asynchronous motors way stator section of the RMS is emf
app_pwm_servo(1)
- 舵机（四伏电机）的c编程，在avr单片机上使用，如atmega16等带pwm的单片机-Rudder (4 volts motor) c programming, the use of SCM avr, such as atmega16 MCU with PWM
Sensorless DC
- Sensorless DC motor control, and it can be used to vehicle seat control without hall sensor.
温升测试
- 电机温升测试系统,适用于工作频率为50/60Hz的单/三相小功率异步电机（≤5KW）、串级电机、电动工具的绕组温升测量。适用于工作频率为50/60Hz的电源变压器、充电器、电感镇流器的绕组温升测量。带电原理：在带电工作情况下测量绕组的直流电阻，并用公式折算成温升。专为电动工具定子，转子温升测量而开发，其中定子采用带电法，转子采用断电法-motor temperature test system is applicable to the
PWM 8-Bit on the 8051
- 用单片机产生Pwm来控制电机的硬件和软件设计，附录为源代码！-MCU Pwm to produce motor control hardware and software design, appendix to the source code!
二相步进电机驱动芯片TA8435H控制
- 二相步进电机驱动芯片TA8435H及其应用-The control of Bipolar Stepper Motor of TA8435
step_motor
- 步进电机控制器,控制电机的VHDL源程序-step motor controller. the vhdl source of step motor controller
USB步进电机输出示例
- some examples of step motor control by EZUSB
AT89C2051驱动步进电机的电路和源码
- 基于C语言得步进电机控制程序代码。基于C语言得步进电机控制程序代码。-based on the C language in stepper motor control code. Based on the C language in stepper motor control code.
VelocityPid
- 这是经典的电机的速度PID控制程序，运用了 TI的DMC库。-This is a classic motor velocity PID control procedures, the use of TI's DMC library.
步进电机精确控制
- 步进电机控制，能很好地学习单片机控制步进电机的原理及应用。-stepper motor control, can be a good learning SCM stepper motor control and application of the principle.
12mjmjaa
- at89C2051驱动步进电机的原理图和源码-at89C2051 stepper motor drives the schematic and source
ucos2 电机控制
- 实现ARM 芯片的一对PWM 输出用于控制直流电机的转动，通过A/D 旋钮控 制其正反转及转速。编程实现ARM 的四路I/O 通道实现环形脉冲分配用于控制步进电机的转动，通过 A/D 旋钮转角控制步进电机的转角。-ARM chip to achieve a PWM control for the DC motor rotation, the A/D control knob and the speed of its revers
ha0095
- HT46R14单相交流感应马达变频器程序说明及源程序-HT46R14 single-phase AC induction motor and the inverter descr iption of the procedures source
electricdrives
- 关于电机的.m程序，是从国外大学网站下的好-on motor. M procedures from foreign universities under the well site Wanton.
aci3_2
- 本程序来自TI公司网站原程序,其功能是通过传统的V/F控制算法并加上对电机的转子速度辨识即无速度传感器控制来实现对感应电机的控制,控制程序可以采用.asm也可以采用.C。程序的具体算法和介绍在软件压缩包有详细介绍！ -this program from the company's Web site TI program, its function is through the traditional V/F control
anmoyizi
- 用PIC单片机对直流电机的控制,用在按摩椅上的.有倒背,敲打等功能.-PIC microcontroller with the DC motor control, used in the massage chair. A backwards, grief capabilities.
20-3 moto_PWM
- 此源码针对C8051F040单片机开发的，用于直流电机驱动电路调试-against C8051F040 microcontroller development for DC motor drive circuit debugging
dianjimo
- 永磁同步电机矢量控制，其中包括仿真电机的参数和具体的数据，适合于中惯量电机高精度控制。-PMSM vector control, including the simulation of the electrical parameters and specific data. for inertia at the high precision motor control.
A3972
- 用单片机控制步进电机驱动芯片：A3972，实现64细分。本程序基于C编写，没有用中断，移植性极高。本人是作者：陈先生，13802939662。-MCU controlled stepper motor driver chips : A3972, achieving 64 segments. The preparation process based on C, with no interruption, highly transplan