资源列表
[VHDL编程] CHIPSCOPE-to-use-the-SDK-tools-
说明:EXCD-1 可编程片上系统 实验例程 EDK部分 功能:使用SDK 工具和CHIPSCOPE 进行软硬件协同调试-CHIPSCOPE to use the SDK tools and hardware and software co-debugging<魏帅> 在 2025-11-22 上传 | 大小:6.98mb | 下载:0
[VHDL编程] I2C
说明:此程序是对I2C总线利用的程序它可以将要保存的数据写进24c0x中,且提供了一个字节写入和联续八个字节写入的功能,和一个字节读出和联续八个字节读出的功能-This program is a program to use the I2C bus can save the data to be written into the 24c0x in, and provides a byte write and United continued to write eight bytes of the fu<赵云> 在 2025-11-22 上传 | 大小:19kb | 下载:0
[VHDL编程] mc8051_test
说明:在FPGA上嵌入51内核,通过修改可以直接在板子上使用的。-FPGA to 51, through the modified kernel embedded can be directly in the board of use.< lijianchen> 在 2025-11-22 上传 | 大小:637kb | 下载:0
[VHDL编程] jiyuVHDLshizhongchengxu
说明:基于VHDL的时钟、正弦波和方波实验报告-VHDL-based clock, sine and square wave experiment report<曾斌> 在 2025-11-22 上传 | 大小:709kb | 下载:0
[VHDL编程] DDS_SIN_TRI_BOX
说明:利用FPGA实现DDS,可输出正弦波,输出频率可调.-FPGA implementation using DDS, sine wave output, the output frequency is adjustable.<曾斌> 在 2025-11-22 上传 | 大小:572kb | 下载:0
[VHDL编程] Verilog
说明:基于Quartus II 9.0 (32-Bit)的Verilog语言时钟程序,五个独立按键分别可调十分秒的加减和确定,此程序通过硬件调试成功。-Based on Quartus II 9.0 (32-Bit) of the Verilog language, clock, five independent second key addition and subtraction, respectively, is adjustable and determined the success of<曾斌> 在 2025-11-22 上传 | 大小:4.1mb | 下载:0
[VHDL编程] weitongbu_datain
说明:这是一个很好的仿真位同步,而且记录了输入的数据进行了转化,可以直接用于verilog里面的信号输入仿真-This is a good simulation of bit synchronization, and recorded data were entered into, which can be directly used for signal input verilog simulation<huangli> 在 2025-11-22 上传 | 大小:186kb | 下载:0
[VHDL编程] FIFOverilog
说明:在FPGA进行数据的缓存,在跨时钟域应用较为广泛-Data cache, in the widely used cross-clock domain<呵呵> 在 2025-11-22 上传 | 大小:11kb | 下载:0