资源列表

« 1 2 ... .32 .33 .34 .35 .36 3437.38 .39 .40 .41 .42 ... 4310 »

[VHDL编程Altera_SoC_seminar

说明:Altera SOC Seminar November 2012
<pippo17> 在 2025-06-09 上传 | 大小:10.81mb | 下载:0

[VHDL编程digital-clock

说明:基于FPGA的数字时钟设计,时钟可以按设定好的时间进行自动计时,FPGA板子上可以显示相应的时钟数字,是数字电路课程的一个课程设计,也是对于VHDL语言的一个熟悉过程.-FPGA-based digital clock design, the clock can be a good time to set automatic timing, FPGA board clock can display the corresponding figure is a digital circuit des
<李源码> 在 2025-06-09 上传 | 大小:330kb | 下载:0

[VHDL编程digtal_clock

说明:FPGA实现数字钟VHDL语言编写,包涵整点报时,清零,调时调分等功能-FPGA digital clock VHDL language, includes the whole point timekeeping, cleared when the transfer function of adjusting grading
<sorghumho> 在 2025-06-09 上传 | 大小:1.32mb | 下载:0

[VHDL编程fpgaaixin

说明:fpga实现爱心,verilog语言编写,采用的是cylone2系列的芯片-fpga implementation of love, verilog language, uses a series of chips cylone2
<sorghumho> 在 2025-06-09 上传 | 大小:284kb | 下载:0

[VHDL编程uart-to-GPIO.vhd

说明:-- Filename ﹕ uart.vhd -- Author ﹕ZRtech -- Descr iption ﹕串口接收与发送程序 -- 本模块的功能是验证实现和PC机进行基本的串口通信的功能。需要在PC机上安装一个串口调试工具来验证-- 程序的功能。程序实现了一个收发一帧10个bit(即无奇偶校验位)的串口控制器,10个bit是1位起始位-- 8个数据位,1个结束位。串口的波特律由程序中定义的div_par参数决定,更改该参数可以实现相应的波-- 特率。程序当前设定的div_
<hj> 在 2025-06-09 上传 | 大小:3kb | 下载:0

[VHDL编程Test9454

说明:S3F9454控制芯片仿真器测试程序,可验证仿真的可行性-S3F9454 control chip emulator test program that verifies the feasibility of the simulation
<luojin> 在 2025-06-09 上传 | 大小:4kb | 下载:0

[VHDL编程sd_card_controller_latest.tar

说明:The SD Card Controller IP Core is MMC/SD communication controller designed to be used in a System-on-Chip. The IP core provides a simple interface for CPU. The communication between the MMC/SD card controller and MMC/SD card is performed accord
<xugongyi> 在 2025-06-09 上传 | 大小:2.18mb | 下载:0

[VHDL编程MGC-07-H

说明:OPENice-i500仿真器验证实例,很实用,方便开发和验证-OPENice-i500 emulator authentication instance, it is useful to facilitate the development and validation
<luojin> 在 2025-06-09 上传 | 大小:95kb | 下载:0

[VHDL编程74HC85

说明:四位数值比较器是一个有多个输入和多个输出组合逻辑电路,在数字系统中有着广泛的应用。它通过比较两个四位二进制数的值,以产生不同的输出结果。本设计兼容数字电路中常用的74HC85数值比较器。-Four numerical comparator is a multiple inputs and multiple outputs combinational logic circuits, has been widely used in digital system. It by comparing th
<a> 在 2025-06-09 上传 | 大小:60kb | 下载:0

[VHDL编程AND_GATE

说明:执行“与”运算的基本门电路。有几个输入端,只有一个输出端。当所有的输入同时为“1”电平时,输出才为“1”电平,否则输出为“0”电平。-Perform basic gate "and" operation. There are several input, there is only one output. When all the input for the "1" at ordinary times at the same time, the output for a "1" level, o
<a> 在 2025-06-09 上传 | 大小:366kb | 下载:0

[VHDL编程spi_vmm1.2

说明:VMM1.2的SPI示例代码,介绍各个验证组件的功能和用法。Verilog编写,使用VCS仿真-The example SPI testbench code of the VMM1.2
<Tianlq> 在 2025-06-09 上传 | 大小:1.77mb | 下载:0

[VHDL编程red

说明:microblaze控制LED和开关。适用于初学者学习XPS-microblaze VHDL C
<黄腾达> 在 2025-06-09 上传 | 大小:6.11mb | 下载:0
« 1 2 ... .32 .33 .34 .35 .36 3437.38 .39 .40 .41 .42 ... 4310 »

源码中国 www.ymcn.org