搜索资源列表
cosine_filter
- 一组取值为+/-1的随机序列，每两个数据之间插入3个0，然后将序列通过一个设计好的根升余弦滤波器，并用周期图法和Welch法分别绘制信号的功率谱。再次通过根升余弦滤波器后用stem函数绘图。-A set of values is+ /-1 random sequence inserted between every two data 3 0, then the sequence through a root
cosfilter
- 升余弦滤波器的matlab仿真程序，使用matlab2008编写-Raised cosine filter matlab simulation program, using matlab2008 write
QAM
- 编写一个含QAM传输的发送和接收模块 1)分别采用复基带仿真和实带通仿真两种形式 a) 实带通仿真时, 载波频率为符号率的4倍 b)发端采用滚降系数0.5的根号升余弦滤波器 2)画出Eb/N0=15dB时的接收波形(收滤波前),取100个采样 3)画出发端输出的眼图和收端过匹配滤波后的眼图(画眼图时不加噪声) 统计误符号率和误比特率与Eb/N0的关系,画出曲线, 与理论计算的曲线相对比 -Prepare to
root_raise_cos
- matlab代码，根升余弦滤波器对数字基带信号进行成型滤波，匹配滤波-Matlab code, the root raised cosine filter on the digital baseband signal shaping filter, matched filter
shiyan
- 用matlab编写了一个，信源产生经过BPSK调制以及根号升余弦滤波器后再加上载波最后将波形图输出的程序-Using matlab prepared a source after BPSK modulation, as well as the square root raised cosine filter and then with the carrier waveform graph output of the program
16QAM
- 仿真练习（第六次刘课件中有关于噪声的添加方法） ？ 编写一个含QAM传输的发送和接收模块 ？ 分别采用复基带仿真和实带通仿真两种形式 ？ 复基带仿真时过采样率为4倍,实带通仿真时过采样率为20倍, 实带通仿真时, 载波频率为符号率的4倍 ？ 发端采用滚降系数0.5的根号升余弦滤波器 ？ 画出Eb/N0=15dB时的接收波形(收滤波前),取100个采样 ？ 画出发端输出的眼图和收
myfir
- verilog编写的16阶升余弦滤波器 采用直接型结构实现 对方波进行滤波 输出波形 含testbench文件-order raised cosine filter verilog written 16 direct-type structure to achieve the other wave filtering the output waveform containing testbench file
shengyuxian
- 产生升余弦滤波器的时域与频域波形，带有默认参数，滚降系数为alpha。-Time domain and frequency domain waveforms produce raised cosine filter with default parameters, roll-off factor for the Alpha.
Raised-Cosine-Filtering
- 对平方根升余弦滤波器进行归一化处理，使得输出的信号更接近输入信号。-Normalized the square root raised cosine filter
iru
- 铱星系统的空中接口采用QPSK调制，发送滤波器采用平方根升余弦滤波器，该程序是铱星系统的发送信号仿真模型。-Iridium air interface using QPSK modulation, transmit filter using square root raised cosine filter, the program is sending signals Iridium system simulation model.
zuoye2
- 主要编写了一组二进制数据通过根升余弦滤波器后的波形，但并没有使用ISE内部的FIR滤波器内核，该程序相当于编写了一个根升余弦滤波器。-Mainly prepared a set of binary data through the root raised cosine filter waveform after, but did not use the ISE internal FIR filter kernel, the progra
QPSK_DSSS
- 该程序使用verilog语言，编写了QPSK-DSSS系统的发端，主要模块包括对同相分量和正交分量的扩频，通过根升余弦滤波器，以及与载波相乘等模块。-The program uses the verilog language, written QPSK-DSSS system, the originator, the main modules include in-phase and quadrature components of t
RaisedCosFilter
- 使用Matlab通信工具箱中的RCOSINE和 RCOSFLT函数设计升余弦滤波器，有效地抑制码间干扰。-Using Matlab communication toolbox RCOSINE and RCOSFLT raised cosine filter design function effectively suppress inter-symbol interference.
RaiseCosFilter
- 升余弦滤波器，matlab编程，从csdn上下的-raised cosine filter
baseband-transmission-system
- 利用升余弦滤波器来接收基带信号的系统仿真，还有眼图分析-The use of the raised cosine filter to receive the baseband signal system simulation, and analysis of niose
2PSK
- 介绍了2PSK的调制解调原理，接收机有带通滤波器和升余弦滤波器接收的性能比较-Describes the modulation and demodulation principle 2PSK, the receiver has a band-pass filter and a raised cosine filter receiver performance comparison
baseband
- 数字基带传输系统的实现。包括升余弦滤波器、匹配滤波器的实现、高斯信道的实现。-Digital baseband transmission system. Including the raised cosine filter, matched filter is implemented, Gaussian channel implementation.
Digital-baseband-transmission
- 数字基带传输系统实验，升余弦滤波器，匹配和非匹配方式-Digital baseband transmission system experiment, raised cosine filter, matching and non-matching approach
maichong
- 脉冲成形，信号通过升余弦滤波器将信号变换成脉冲波-Pulse shaping, the signal passes through the filter cosine wave signal is converted into a pulse
qpsk-RRC
- qpsk的仿真以及根升余弦滤波器成形另外有误比特率的比较-qpsk simulation and shaping the root raised cosine filter