资源列表
[VHDL编程] huffmancode
说明:哈夫曼编码,非最优编码做了功能实现,最优编码程序仍然存在问题-Huffman coding, non-optimal coding done function, the optimal coding process is still a problem<薛岳> 在 2025-07-05 上传 | 大小:5kb | 下载:0
[VHDL编程] UpdateApp1.2
说明:这是FPGA的升级程序,C#发送bin文件给FX3,然后FX3再把数据通过SPI通信发送给FPGA-This upgrade program the FPGA, C# FX3 sent to the bin, and then FX3 data to the FPGA via SPI communications<buptlw> 在 2025-07-05 上传 | 大小:1.21mb | 下载:0
[VHDL编程] Uart_Randy
说明:this s the uart source code and document<phuong> 在 2025-07-05 上传 | 大小:149kb | 下载:0
[VHDL编程] endatreduced
说明:endat2.2协议对应的驱动模块代码,适用于开发面向海德汉编码器反馈环控制模块-endat2.2 driver module corresponding to the protocol codes, for developing suitable feedback loop Heidenhain encoder control module<苟李> 在 2025-07-05 上传 | 大小:7kb | 下载:1
[VHDL编程] sineWaveGenerator
说明:FPGA生成高质量400Hz正弦信号的代码,可调节信号频率、初相位及信号质量-FPGA generated code 400Hz sinusoidal signal quality, signal frequency can be adjusted, and the initial phase of signal quality<苟李> 在 2025-07-05 上传 | 大小:3kb | 下载:0
[VHDL编程] spi_master
说明:使用verilog语言实现FPGA下的SPI的主机模式,波特率为晶振时钟的五分之一,发送稳定-Using verilog language to achieve the SPI under the host mode, the baud rate is one-fifth of the crystal clock, send stable<张仑仑> 在 2025-07-05 上传 | 大小:109kb | 下载:0