资源列表

« 1 2 ... .68 .69 .70 .71 .72 1973.74 .75 .76 .77 .78 ... 4310 »

[VHDL编程uartverilog_xilinx

说明:本程序实现了通用异步收发的功能,程序改变自xilinx提供的参考文档,比较完善,读者可以通过程序进一步熟悉通用异步收发的功能。-This procedure implements the UART function, the program changed the reference from the xilinx documentation, more complete, more familiar to readers can be programmed universal asynchro
<张扬> 在 2025-07-20 上传 | 大小:458kb | 下载:0

[VHDL编程vgaverilog

说明:本程序实现了基于FPGA/CPLD的VGA显示设计,简单易懂,可以输出8种颜色,即3位RGB颜色,共8种组合。连接FPGA的VGA口和液晶等显示器即可观察实验现象。-This procedure implemented based on FPGA/CPLD' s VGA display design, easy to understand, you can output 8 colors, the three RGB colors, a total of 8 combinations. F
<张扬> 在 2025-07-20 上传 | 大小:365kb | 下载:0

[VHDL编程ps2verilog

说明:本程序实现了基于FPGA的PS2键盘控制器,主机即FPGA读取键盘的键码然后解码输出到上位机(串口调试助手)显示,用户友好,调试方便,-This program implements the PS2 keyboard controller based on FPGA, the FPGA reads the keyboard master key code and then decode the output to the host computer (serial debugging assis
<张扬> 在 2025-07-20 上传 | 大小:304kb | 下载:0

[VHDL编程full_add

说明:全加器,基于原理图设计的全加器。经过时序仿真验证-Full adder, based on the schematic design of the full adder. After timing simulation
<陈泽辉> 在 2025-07-20 上传 | 大小:8kb | 下载:0

[VHDL编程biaojueqi

说明:四路表决器。原理图设计。经过时序仿真验证。-Four voting machine. Schematic design. After a timing simulation.
<陈泽辉> 在 2025-07-20 上传 | 大小:122kb | 下载:0

[VHDL编程FPGA_FIFO

说明:FPGA中同步FIFO的使用小结,FPGA中的FIFO,分为同步FIFO,异步FIFO和双向FIFO。同步FIFO一般用于数据的缓存,异步FIFO一般用于跨时钟域的同步上。-FPGA use in synchronous FIFO summary, FPGA' s FIFO, divided into synchronous FIFO, Asynchronous FIFO and two-way FIFO. Generally used for data synchronization b
<张伟刚> 在 2025-07-20 上传 | 大小:239kb | 下载:0

[VHDL编程cordic

说明:Algorithm for cordic
<ammar> 在 2025-07-20 上传 | 大小:1kb | 下载:0

[VHDL编程QAM

说明:QAM code for project VHDL
<ammar> 在 2025-07-20 上传 | 大小:1kb | 下载:0

[VHDL编程adder

说明:adder subtractor porgramme
<ammar> 在 2025-07-20 上传 | 大小:2kb | 下载:0

[VHDL编程time_cnt

说明:very good programme for you
<ammar> 在 2025-07-20 上传 | 大小:1kb | 下载:0

[VHDL编程runtest

说明:chirp trip for beginners
<ammar> 在 2025-07-20 上传 | 大小:1kb | 下载:0

[VHDL编程EP2C8_PER_lcd1602

说明:EP2C8Q208,控制1602LCD的Verilog程序,针对不同的板子,引脚配置需要修改一下-EP2C8Q208, control 1602LCD the Verilog program, for different board, pin configuration need to modify the look
<wangyunlong> 在 2025-07-20 上传 | 大小:263kb | 下载:0
« 1 2 ... .68 .69 .70 .71 .72 1973.74 .75 .76 .77 .78 ... 4310 »

源码中国 www.ymcn.org