资源列表
[VHDL编程] shifter
说明:用vhdl语言采用时序电路(移位寄存器)的方式实现(7,4)循环码编码器-Vhdl language used by the timing circuit (shift register) way to achieve (7,4) cyclic code encoder<Dong Yitian> 在 2025-06-17 上传 | 大小:1kb | 下载:0
[VHDL编程] UART
说明:Verilog HDL编写的串口程序实例,很详细好用的参考代码。针对Xilinx FPGA开发板,在Xilinx ISE编译调试成功,串口开发的经典例程。-Verilog HDL serial program written examples, very good reference code in detail. In view of the Xilinx FPGA development board, in Xilinx ISE compiler debugging success, a s<韩建平> 在 2025-06-17 上传 | 大小:214kb | 下载:0
[VHDL编程] 99mul_3
说明:九九乘法表系统,ARH信号低电平时可手动输入乘数、被乘数;ARH高电平时自动生成乘数、被乘数进行99乘法计算。在自动过程中若ARH置0,则暂停当前自动生成的乘数、被乘数乘法运算,可进行外部输入,当ARH再次回到高电平1时,则返回暂停处的乘数、被乘数并继续向下运算。START信号具有一个复位重启的功能。-Nine nine multiplication table system, ARH signal in low level can be manually input multiplier, t<ft> 在 2025-06-17 上传 | 大小:799kb | 下载:0
[VHDL编程] BitHound_SP601_1.0_
说明:逻辑分析仪器代码,VHDL实现,支持100M采样速度-Logic analysis instrumentation code, VHDL implementation, support 100M sampling rate<钟文> 在 2025-06-17 上传 | 大小:24.15mb | 下载:0
[VHDL编程] FPGA_SDRAM_ReadAndWrite
说明:SDRAM读写控制的实现与Modelsim仿真-Implementation and Modelsim SDRAM read and write control simulation<yzhq> 在 2025-06-17 上传 | 大小:1.69mb | 下载:0
[VHDL编程] FPGA_verilog_VGA_SimpleDemo
说明:FPGA初级程序,基于verilog的VGA简单接口驱动-VGA-based verilog simple interface driver<yzhq> 在 2025-06-17 上传 | 大小:1.3mb | 下载:0
[VHDL编程] 2112312
说明:模拟交通灯实验,实验报告 用 8255 做输出口,控制十二个发光管(4 组红绿黄灯)的亮灭,模拟十字路*通灯 管理。-Simulated traffic light experiments report To do with the 8255 output, control twelve light tube (4 groups of red, green yellow) light off, analog crossroads traffic lights Managem<wwrkrwp> 在 2025-06-17 上传 | 大小:89kb | 下载:0
[VHDL编程] frame_syn
说明:通信系统中数据的传输以帧为单位,在FPGA中帧头检测是通信系统中的一部分,该程序实现了FPGA中帧头的检测。-Transmission of data in a communication system in units of fr a mes, the fr a me header is detected in the FPGA part of the communication system, the realization of the fr a me header is detected<caobaolong> 在 2025-06-17 上传 | 大小:11kb | 下载:0
[VHDL编程] spi_verilog
说明:开发语言Verilog,实现spi总线控制,内部有顶层文件,仿真文件等。-Development language Verilog, realize spi bus control, internal top-level file, simulation files.<杰克> 在 2025-06-17 上传 | 大小:8kb | 下载:0
[VHDL编程] antenna_position
说明:本程序为船舶导航雷达天线方位部分的verilog程序,包含QPF工程。-This procedure for the marine navigation radar antenna part of the Verilog program, including QPF works.<鲁文芳> 在 2025-06-17 上传 | 大小:8.81mb | 下载:0