搜索资源列表
comm_maintain
- 串口收发工具,包括MODBUS、CDT、FDK等多种通用规约解释,并包括UNICODE码转换程序-serial transceivers tools, including MODBUS, CDT, FDK other common interpretation of the statute. and including UNICODE code conversion
chuanxingzhuanhaunbingxing
- 通过多通道串-并转换器将多个同步串行数据流转换为并行数据-through multi-channel serial-to-parallel converter multiple synchronous serial data streams converted to parallel data
u-uart
- 一个可综合的串并转换接口verilog源代码-a comprehensive series of conversion and interface Verilog source code
S2P_xapp194
- VHDL,verilog串并转换源程序 Xilinx公司参考资料-VHDL, verilog Series and conversion company Xilinx reference source
SPtransform
- Verilog HDL编写的串并转换。采用iout类型口。包含源文件和测试文件。用Modsim编译。-Verilog HDL Series and the preparation of the conversion. I used iout types. Includes source and test papers. Modsim compiler used.
MSC51_PC_Communicaton
- 这是一个51单片机与PC的通信系统:利用3*4小键盘输入0~9的一串数字(不大于5),通过8051自带的串口发送给PC并显示在系统的6位LED上;单片机接收上位机的输入并显示在LED上。8051串行口经232电平转换后,与PC机串行口相连。PC机使用串口调试应用程序V2.2.exe,实现上位机与下位机的通讯。-This is a 51 microcontroller and PC communication system : use 3
data_transfer
- 同步串行数据发送电路SSDT的基本功能是将并行数据转换成串行数据并进行同步发送。系统写入和读出时序完全兼容Intel8086时序。 系统以同步信号开始连续发送四个字节,在发送中出现5个1时插入一个0,在四个数据发送结束而下一次同步没有开始之前,发送7FH,这时中间不需要插入零 -synchronous serial data transmission circuit SSDT the basic function is to c
app_ADC_with_digit_8_led_by_kkyou
- 电压计(c语言编写的) 通过led灯显示 电路图说明: 1、R1、R2、D1、D2 组成发光二极管显示,显示过压或过流状态; 2、PC3外接模拟信号 采用内部参考电压所以AREF传电容接地抗干扰AVCC接VCC提供AD转换电压 3、PC5提供164的时钟信号 PC4提供串行输入信号 164具有10ma的输出电流,又具有串入并出以及信号锁存的动能,数码管又为共阴管,所以无须另加驱动 这
znlubj
- 实现智能大厦自动报警系统主要是通过串口通信来实现的。计算机对数模转换设备发送到端口的数据进行处理,并根据用户摄设置信息作出相应动作,同时通知大厦管理人员,确保万无一失。-Intelligent Building automatic alarm system is mainly through serial communications to achieve. Computer digital-to-analog converter eq
PCMtoWave
- 录制和播放wav文件,显示波形,并能够通过串口接收pcm语音数据,转换为wav文件播放-recording and playback wav documents, waveform, and through the serial data receiver pcm voice, Converting to wav Player
LPC2100_LCD_PORT
- 本文分别以GPI0口直接连接、串并转换连接、CPLD分部连接三种方法阐述了无外部总线的Philips ARM微控制器LPC2l0X与点阵图形液晶显示器的接口设计,并给出了硬件电路框图和主要程序。-paper were directly connected GPI0 mouth, and string conversion connectivity, CPLD Division linking the three methods desc
ofdmproj_matlab
- 这是一个matlab程序,其中包括初始化程序,QAM程序,OFDM主程序,以及发送接受,串并转换等各部分的说明,各个部分一目了然。-This is a Matlab procedures, including the initialization procedures, QAM procedures, OFDM main program, and this acceptance, and series such as the conve
CH451_INT1
- 在数码管上显示按键值(基于单片机中,串并口转换芯片CH451的数码管显示功能)-the digital keys displayed on the control value (based on the single-chip microcomputer, Series Parallel conversion chip LED digital display tube)
chuanbingzhuanhuan
- VHDL代码,仿真通过,变异可以,下载变成文件,但需要修改,串并转换-VHDL code, through simulation, the variation can be downloaded into a document, but need to change, and change series
progtstdyfthfge
- 单片机和PC机串口通讯实例说明 首先打开串口调试程序并按要求设置。启动51板后,按S10切换至接收状态,按S12切换至发送状态,启动默认为发送状态。 发送状态: 进入发送状态后,可向PC发送1-9 9个数字,并且数码显示同时显示发送的数,按S1发送1,按S2发送2,依次到按S9发送9。S11无用。发送成功可在串口调试程序的数据接收栏中显示收到的数据。 发送状态: 进入发送状态后,在串口调
chuanbing
- 串并转换源代码.串 并转换源代码.-String and convert the source code. String and convert the source code.
tiaozhijietiao
- QPSK详细的调制解调程序。包括串并转换,判决等等。-QPSK modulation and demodulation process in detail. Including SERDES, judgments and so on.
ComCalWaveV4.1
- 串口虚拟示波器,上传并显示ADC转换的值,便于分析调试-Serial virtual oscilloscope, upload and display the ADC conversion value, ease of analysis debugging
HexLoader
- 通过串行口加载HEX程序文件,转换成BIN格式并保存在片外RAM中;加载完毕后蜂鸣器鸣叫,并等待按下K4;K4按下后,跳转到RAM去执行程序。-Through the serial port to load HEX file, converted to BIN format and stored in the RAM chip in loaded after the call buzzer and wait for press K4
zndsbjxt
- 智能大厦报警系统:主要通过串口通信来实现。计算机对数模转换设备发送到端口的数据进行处理,并根据用户设置的信息相应的动作,同时,还需要通知大厦的管理人员,以确保万无一失。-Intelligent Building alarm system: mainly through the serial communication to achieve. Computer digital-to-analog conversion equipment